> > > > > Single Clamp Aluminum A1C Hubs
> Single Clamp Aluminum A1C Hubs
Single Clamp Aluminum A1C Hubs
Part Number: 6A37-A1C
Specifications
Click for English
Click for Metric
- Continuous Rated Torque: 1,600 in-lbs
- Continuous Rated Torque : 181 Nm
- Peak Rated Torque: 3,200 in-lbs
- Peak Rated Torque : 362 Nm
- Minimum Bore (E): 0.750 inches
- Minimum Bore (E) : 18 mm
- Maximum Bore (E): 2.000 inches
- Maximum Bore (E) : 51 mm
- Maximum Speed: 8,000 RPM
- Torsional Stiffness: 10,374 In-lbs/degree
- Torsional Stiffness : 67,158 Nm/rad
- Parallel Misalignment: 0.013 inches
- Parallel Misalignment : 0.33 mm
- Angular Misalignment: 2 °
- Axial Misalignment: 0.071 inches
- Axial Misalignment : 1.8 mm
- Weight at Max Bore: 3.51 lbs
- Weight at Max Bore : 1.59 kg
- Weight at Min Bore: 4.50 lbs
- Weight at Min Bore : 2.04 kg
- Inertia at Max Bore: 8.65 lb-in²
- Inertia at Max Bore : 25.3 kg-cm²
- Inertia at Min Bore: 9.26 lb-in²
- Inertia at Min Bore : 27.1 kg-cm²
- Outside Diameter (A): 3.98 inches
- Outside Diameter (A) : 101 mm
- Overall Length (L): 4.06 inches
- Overall Length (L) : 103 mm
- Hub Length (B): 1.81 inches
- Hub Length (B) : 46.0 mm
- Distance Between Shaft Ends (C): 0.44 inches
- Distance Between Shaft Ends (C) : 11.2 mm
- Inside Diameter of Disc-Pack (H): 1.51 inches
- Inside Diameter of Disc-Pack (H) : 38.4 mm
- Clamp Screw to Bore (R): 1.42 inches
- Clamp Screw to Bore (R) : 36.0 mm
- Clamp Screw to End of Hub (G): 0.50 inches
- Clamp Screw to End of Hub (G) : 12.7 mm
- Clamp Bolt Size (D): M12
- Tightening Torque (D): 74 ft-lbs
- Tightening Torque (D) : 100 Nm
| Single Clamp Type Aluminum A1C Hubs 6a37-a1c Configuration |
| Bore Size D1 |
|
| d1 Keyway Option |
|
| Bore Size D2 |
|
| d2 Keyway Option |
|
Single Clamp Aluminum A1C Hubs
Part Number: 6A37-A1C
Single Clamp Aluminum A1C Hubs 6A37-A1C Specifications
Click for English
Click for Metric
| Part Number | 6A37-A1C |
| Continuous Rated Torque: | 1,600 in-lbs |
| Continuous Rated Torque : | 181 Nm |
| Peak Rated Torque: | 3,200 in-lbs |
| Peak Rated Torque : | 362 Nm |
| Minimum Bore (E): | 0.750 inches |
| Minimum Bore (E) : | 18 mm |
| Maximum Bore (E): | 2.000 inches |
| Maximum Bore (E) : | 51 mm |
| Maximum Speed: | 8,000 RPM |
| Torsional Stiffness: | 10,374 In-lbs/degree |
| Torsional Stiffness : | 67,158 Nm/rad |
| Parallel Misalignment: | 0.013 inches |
| Parallel Misalignment : | 0.33 mm |
| Angular Misalignment: | 2 ° |
| Axial Misalignment: | 0.071 inches |
| Axial Misalignment : | 1.8 mm |
| Weight at Max Bore: | 3.51 lbs |
| Weight at Max Bore : | 1.59 kg |
| Weight at Min Bore: | 4.50 lbs |
| Weight at Min Bore : | 2.04 kg |
| Inertia at Max Bore: | 8.65 lb-in² |
| Inertia at Max Bore : | 25.3 kg-cm² |
| Inertia at Min Bore: | 9.26 lb-in² |
| Inertia at Min Bore : | 27.1 kg-cm² |
| Outside Diameter (A): | 3.98 inches |
| Outside Diameter (A) : | 101 mm |
| Overall Length (L): | 4.06 inches |
| Overall Length (L) : | 103 mm |
| Hub Length (B): | 1.81 inches |
| Hub Length (B) : | 46.0 mm |
| Distance Between Shaft Ends (C): | 0.44 inches |
| Distance Between Shaft Ends (C) : | 11.2 mm |
| Inside Diameter of Disc-Pack (H): | 1.51 inches |
| Inside Diameter of Disc-Pack (H) : | 38.4 mm |
| Clamp Screw to Bore (R): | 1.42 inches |
| Clamp Screw to Bore (R) : | 36.0 mm |
| Clamp Screw to End of Hub (G): | 0.50 inches |
| Clamp Screw to End of Hub (G) : | 12.7 mm |
| Clamp Bolt Size (D): | M12 |
| Tightening Torque (D): | 74 ft-lbs |
| Tightening Torque (D) : | 100 Nm |
